Kullanıcı:ZamanSeyyahı/Elektron mikroskobu

The SEM produces images by probing the specimen with a focused electron beam that is scanned across a rectangular area of the specimen (raster scanning). When the electron beam interacts with the specimen, it loses energy by a variety of mechanisms. The lost energy is converted into alternative forms such as heat, emission of low-energy secondary electrons and high-energy backscattered electrons, light emission (cathodoluminescence) or X-ray emission, all of which provide signals carrying information about the properties of the specimen surface, such as its topography and composition. The image displayed by an SEM maps the varying intensity of any of these signals into the image in a position corresponding to the position of the beam on the specimen when the signal was generated. In the SEM image of an ant shown below and to the right, the image was constructed from signals produced by a secondary electron detector, the normal or conventional imaging mode in most SEMs.

[[Kategori:Anatomik patoloji]] [[Kategori:Elektron mikroskopları]] [[Kategori:Alman icatları]] [[Kategori:Mikroskoplar]] [[Kategori:Patoloji]] [[Kategori:Bilimsel teknikler]]